Difficulty

Easy

Steps

6

Time Required

                          5 - 10 minutes

Sections

1

  • Lower Smart Plate
  • 6 steps

Flags

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

  • BackPlayStation 2 Slimline SCPH-900xx

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Lower Smart Plate
  • Turn off your PlayStation 2 and remove the disc and Memory Card.
  • Turn over the PlayStation 2 and put it on a soft surface (e.g. a towel).

Turn off your PlayStation 2 and remove the disc and Memory Card.

Turn over the PlayStation 2 and put it on a soft surface (e.g. a towel).

1024

Step 2

  • Locate the six covers.
  • Two are located underneath the feet.
  • One cover is located underneath the Void sticker.

Locate the six covers.

Two are located underneath the feet.

One cover is located underneath the Void sticker.

Step 3

  • Remove the Void sticker with a Spudger and some cleaning alcohol
  • Removing the Void sticker will void the warranty of your device!
  • Some versions of that console maybe don’t have the sticker or it’s relocated.

Remove the Void sticker with a Spudger and some cleaning alcohol

Removing the Void sticker will void the warranty of your device!

Some versions of that console maybe don’t have the sticker or it’s relocated.

Step 4

  • Remove the covers by using either a Spudger, Opening Picks or your fingernail.

Remove the covers by using either a Spudger, Opening Picks or your fingernail.

Step 5

  • Remove the six Phillips #1 screws with a screwdriver.
  • The screws on the right are a bit deeper inside the shell as like the rest but are the same size.

Remove the six Phillips #1 screws with a screwdriver.

The screws on the right are a bit deeper inside the shell as like the rest but are the same size.

Step 6

  • Separate the clips at the front and the overhanging side from their mounting using a Prying Tool.
  • Separate the two halves.

Separate the clips at the front and the overhanging side from their mounting using a Prying Tool.

Separate the two halves.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.                                             


        Julian is helping us fix the world!      Want to contribute?      Start translating ›

Special thanks to these translators:

100%

Julian

Author

                                      with 1 other contributor 


                    Julian

Member since: 10/22/2020

521 Reputation

                                      2 Guides authored                  



                       Badges:
                       7







                                                        +4 more badges