Playstation 2 Top Cover Replacement Repair Guide

Difficulty

Easy

Steps

Time Required

                          5 minutes

Sections

Top Cover
4 steps

Flags

BackPlayStation 2
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Top Cover

Flip the PlayStation 2 over so it lays with the bottom of the device facing upwards.
Use the flat edge of a metal spudger to pry the eight flat screw covers out.
Remove the following eight screws securing the top cover to the bottom case:
Four 55.4 mm Philips screws
Four 18.0 mm Phillips screws

Flip the PlayStation 2 over so it lays with the bottom of the device facing upwards.

Use the flat edge of a metal spudger to pry the eight flat screw covers out.

Remove the following eight screws securing the top cover to the bottom case:

Four 55.4 mm Philips screws

Four 18.0 mm Phillips screws

1024

Step 2

Some models have a different number of screws and feet. Remove all the feet and screws in the bottom of the case.
The 10 screw model has 6 screws in the bottom-most portion and 4 in the upper tray.

Some models have a different number of screws and feet. Remove all the feet and screws in the bottom of the case.

The 10 screw model has 6 screws in the bottom-most portion and 4 in the upper tray.

Step 3

Peel the warranty sticker (located next to the main power switch) straight away from the case.
To avoid activating the VOID that may come up, heat it carefully to remove and replace it clean

Peel the warranty sticker (located next to the main power switch) straight away from the case.

To avoid activating the VOID that may come up, heat it carefully to remove and replace it clean

Step 4

Flip the PlayStation 2 back to its original upside position.
Lift the top cover off the bottom case.
To facilitate the removal, it is recommended to pry open the half closer to the power switch first while rocking the top cover towards the front of the bottom case.
Carefully remove the power cord that attaches the top and bottom halves by disconnecting the power cord assembly from the top case.

Flip the PlayStation 2 back to its original upside position.

Lift the top cover off the bottom case.

To facilitate the removal, it is recommended to pry open the half closer to the power switch first while rocking the top cover towards the front of the bottom case.

Carefully remove the power cord that attaches the top and bottom halves by disconnecting the power cord assembly from the top case.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      27 other people completed this guide.

Author

                                      with 12 other contributors

                    jwyoung

Member since: 11/04/2009

2,545 Reputation

                                      5 Guides authored                  



                       Badges:
                       15







                                                        +12 more badges

Team

                       Cal Poly, Team 19-1, Maness Fall 2009                        

                                                  Member of Cal Poly, Team 19-1, Maness Fall 2009 



                    CPSU-MANESS-F09S19G1                     


                                            4 Members                     


                                            34 Guides authored

Introduction#

What you need#

#

#

#

#

#

#

Team#

#

Introduction

What you need

Team