Difficulty
Moderate
Steps
6
Time Required
45 minutes
Sections
1
- Blu-ray Disc Drive
- 6 steps
Flags
Member-Contributed Guide
An awesome member of our community made this guide. It is not managed by iFixit staff.
BackPlayStation 3 Slim
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Video Overview
Step 1
Blu-ray Disc Drive
- If present, remove the pieces of tape securing the cables to the body of the Blu-ray drive.
If present, remove the pieces of tape securing the cables to the body of the Blu-ray drive.
1024
Step 2
- Use the flat end of a spudger or your fingernail to flip up the retaining flap on the Blu-ray ribbon cable socket.
- Be sure you are prying up on the movable retaining flap, not the socket itself.
Use the flat end of a spudger or your fingernail to flip up the retaining flap on the Blu-ray ribbon cable socket.
Be sure you are prying up on the movable retaining flap, not the socket itself.
Step 3
- Pull the Blu-ray ribbon cable straight up and out of its socket.
Pull the Blu-ray ribbon cable straight up and out of its socket.
Step 4
- Pull the Blu-ray power cable straight up to lift its connector out of the socket on the Blu-ray drive.
Pull the Blu-ray power cable straight up to lift its connector out of the socket on the Blu-ray drive.
Step 5
- Remove the single 9.5 mm Phillips screw securing the Blu-ray drive to the lower case.
Remove the single 9.5 mm Phillips screw securing the Blu-ray drive to the lower case.
Step 6
- Lift the Blu-ray drive slightly by its right edge to dislodge the control board from its housing.
- Remove the Blu-ray drive from the PS3.
- After you reinstall the Blu-ray drive, be sure the control board is firmly seated in the lower case before proceeding.
- If replacing the Blu-ray drive with a new drive, swap the circuit board from your old drive into the new drive.
Lift the Blu-ray drive slightly by its right edge to dislodge the control board from its housing.
Remove the Blu-ray drive from the PS3.
After you reinstall the Blu-ray drive, be sure the control board is firmly seated in the lower case before proceeding.
If replacing the Blu-ray drive with a new drive, swap the circuit board from your old drive into the new drive.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
19 other people completed this guide.
Author
with 3 other contributors
ZFix
Member since: 12/09/2013
187,195 Reputation
330 Guides authored
Badges:
35
+32 more badges
Team
Master Techs
Member of Master Techs
Community
310 Members
1,168 Guides authored
David - Oct 10, 2014
Reply
Donde puedo comprar refacciones y partes para PS3 Slim?
Ivan Ramirez - Jan 5, 2017
yo vendo amigo = ivaramso@gmail.com para ventas
Ben Kevan - Dec 16, 2014
Reply
How can this be easy, but the Blu-Ray drive be considered Moderate? You need to complete the Blu-Ray drive removal prior to replacing the laser lens, which means this is at best a Moderate task.
cmchallam - Feb 28, 2016
Reply
This is not lens replacement, this is drive replacement. Is there a separate guide for lens replacement?
Beninja - Oct 5, 2017
Reply
Shows how to do the laser assembly in the video but not how to reinstall it in the drive. Lazy guide. Just buy a whole new drive if you are following this guide.