Featured
Featured Guide
Difficulty
Easy
Steps
10
Time Required
5 - 10 minutes
Sections
2
- How to Remove the Stand on a PlayStation 5
- 6 steps
- Faceplates
- 4 steps
Flags
1
Featured Guide
This guide has been found to be exceptionally cool by the iFixit staff.
BackPlayStation 5
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
Before you begin, completely power down and unplug all cables from your console. Remember to follow general electrostatic discharge (ESD) safety procedures while repairing the console.
What you need
Step 1
Remove the stand screw
- If your PlayStation 5 is in its vertical orientation, flip it upside down so the stand is facing up.
- If your PlayStation 5 is in its horizontal orientation, skip to Step 6.
- Work on a flat surface to prevent your PlayStation from falling over.
- Use a coin or a flathead screwdriver to remove the 26.5 mm-long stand screw.
If your PlayStation 5 is in its vertical orientation, flip it upside down so the stand is facing up.
If your PlayStation 5 is in its horizontal orientation, skip to Step 6.
Work on a flat surface to prevent your PlayStation from falling over.
Use a coin or a flathead screwdriver to remove the 26.5 mm-long stand screw.
1024
Step 2
Remove the vertical stand
- Lift straight up to remove the stand.
Lift straight up to remove the stand.
Step 3
Store the stand screw
- Insert the screw into the cubby on the bottom of the stand.
Insert the screw into the cubby on the bottom of the stand.
Step 4
Cap the screw hole
- Use a pair of tweezers or your fingernail to remove the cap from the cubby.
- Use your finger to press the cap into the screw hole.
Use a pair of tweezers or your fingernail to remove the cap from the cubby.
Use your finger to press the cap into the screw hole.
Step 5
Close the cubby
- Twist the stand counterclockwise to close the cubby.
Twist the stand counterclockwise to close the cubby.
Step 6
Remove the horizontal stand
- If your PlayStation 5 is in its horizontal orientation, rest it on its face with the charing port facing up.
- Lift the stand straight up to remove it.
If your PlayStation 5 is in its horizontal orientation, rest it on its face with the charing port facing up.
Lift the stand straight up to remove it.
Step 7
Remove the left faceplate
- Lift up the corner of the faceplate with the PlayStation logo to unclip it from the case.
Lift up the corner of the faceplate with the PlayStation logo to unclip it from the case.
Step 8
- While lifting up the corner, slide the faceplate towards the bottom of the device.
- Remove the left faceplate.
While lifting up the corner, slide the faceplate towards the bottom of the device.
Remove the left faceplate.
Step 9
Remove the right faceplate
- Flip the device over so that the USB and ethernet ports are on the left side from your perspective.
- Lift up the corner of the faceplate to unclip it from the case.
Flip the device over so that the USB and ethernet ports are on the left side from your perspective.
Lift up the corner of the faceplate to unclip it from the case.
Step 10
- While lifting up the corner, slide the faceplate towards the bottom of the device.
- Remove the right faceplate.
Remove the right faceplate.
To reassemble your device, follow these instructions in reverse order.
Take your e-waste to an R2 or e-Stewards certified recycler.Repair didn’t go as planned? Try some basic troubleshooting, or ask our PlayStation 5 Answers community for help.
Cancel: I did not complete this guide.
4 other people completed this guide.
Author
with 1 other contributor
Clay Kim
Member since: 02/16/2021
5,838 Reputation
21 Guides authored
Badges:
21
+18 more badges
