Difficulty

Easy

Steps

5

Time Required

                          15 minutes

Sections

1

  • Controller Cord
  • 5 steps

Flags

0

  • BackPlayStation Classic

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Controller Cord
  • Turn the controller over so that the screws are facing up.

Turn the controller over so that the screws are facing up.

1024

Step 2

  • Use a small Phillips #0 screwdriver to remove the eight Xmm screws.
  • Make sure to store the screws in a safe place so they are not lost before reassembly.

Use a small Phillips #0 screwdriver to remove the eight Xmm screws.

Make sure to store the screws in a safe place so they are not lost before reassembly.

Step 3

  • Use the Jimmy tool to take the back part off and get into the controller.
  • It shouldn’t take too much force to remove the back part. Make sure all screws are taken out beforehand so you avoid hurting yourself or damaging the controller.

Use the Jimmy tool to take the back part off and get into the controller.

It shouldn’t take too much force to remove the back part. Make sure all screws are taken out beforehand so you avoid hurting yourself or damaging the controller.

Step 4

  • You will notice that the controller cord is plugged into a Micro USB port on the controller motherboard.

You will notice that the controller cord is plugged into a Micro USB port on the controller motherboard.

Step 5

  • To unplug the cord from the controller motherboard, carefully take the cord out from in between the small pegs that it is nestled into.
  • When unplugging the cord, hold the controller so that no significant pressure is being applied to the motherboard that will damage it.

To unplug the cord from the controller motherboard, carefully take the cord out from in between the small pegs that it is nestled into.

When unplugging the cord, hold the controller so that no significant pressure is being applied to the motherboard that will damage it.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      3 other people completed this guide.

Author

                                      with 3 other contributors 


                    Maxwell Webb

Member since: 04/22/2019

631 Reputation

                                      5 Guides authored                  



                       Badges:
                       11







                                                        +8 more badges

Team

                       Cal Poly, Team S2-G8, Maness Spring 2019                        

                                                  Member of Cal Poly, Team S2-G8, Maness Spring 2019 



                    CPSU-MANESS-S19S2G8                     


                                            2 Members                     


                                            20 Guides authored

Jamal Saeed - Mar 16, 2020

Reply

Will this fix the controller being unresponsive?

enrique bengaura - Oct 5, 2022

maybe but It depends