Difficulty
Easy
Steps
5
Time Required
10 minutes
Sections
1
- Motherboard
- 5 steps
Flags
Better Introduction
Improve this guide by completing or revising its introduction.
BackPlaystation TV
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Motherboard
- Use the plastic spudger to pry up the bottom piece of the case to release the clips.
Use the plastic spudger to pry up the bottom piece of the case to release the clips.
1024
Step 2
- Remove the four 6 mm Phillips screws.
- Remove the two Phillips #0 screws.
Remove the four 6 mm Phillips screws.
Remove the two Phillips #0 screws.
Step 3
- Remove the heat shield using the plastic opening tool.
- Slide the tool around the edges until the shield is free.
Remove the heat shield using the plastic opening tool.
Slide the tool around the edges until the shield is free.
Step 4
- Remove the last 6mm Phillips #0 screw from the motherboard.
Remove the last 6mm Phillips #0 screw from the motherboard.
Step 5
- Use a plastic opening tool to pry up gently on the motherboard, and remove it.
Use a plastic opening tool to pry up gently on the motherboard, and remove it.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
6 other people completed this guide.
Author
with 2 other contributors
Nick Dixon
Member since: 02/08/2016
275 Reputation
1 Guide authored
Badges:
9
+6 more badges
Team
IUPUI, Team 3-1, Baechle Spring 2016
Member of IUPUI, Team 3-1, Baechle Spring 2016
IUPUI-BAECHLE-S16S3G1
4 Members
4 Guides authored
