Playstation Vr Processor Unit Cooling Fan Replacement Repair Guide

Difficulty

Easy

Steps

Time Required

                          5 - 8 minutes

Sections

Processor Unit Cooling Fan
7 steps

Flags

BackPlayStation VR
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Processor Unit Cooling Fan

On one side of the console (the side adjacent to the fan vent), there will be two 6 mm screws. Unscrew them with a PH #000 screwdriver.

On one side of the console (the side adjacent to the fan vent), there will be two 6 mm screws. Unscrew them with a PH #000 screwdriver.

1024

Step 2

Press and slide the side panel (it will have the two ports) back to reveal an additional 6 mm screw.
Unscrew the 6mm screw with a PH #000 screwdriver.

Press and slide the side panel (it will have the two ports) back to reveal an additional 6 mm screw.

Unscrew the 6mm screw with a PH #000 screwdriver.

Step 3

Slide the panel back into place.

Slide the panel back into place.

Step 4

Using a plastic opening tool, carefully pry the panel from the main console to reveal the HDMI ports.
You will probably need to lift it on both sides in order for the panel to come loose.

Using a plastic opening tool, carefully pry the panel from the main console to reveal the HDMI ports.

You will probably need to lift it on both sides in order for the panel to come loose.

Step 5

Turn the console over.
Unscrew the two 9 mm screws with a PH #000 screwdriver.

Turn the console over.

Unscrew the two 9 mm screws with a PH #000 screwdriver.

Step 6

With the plastic opening tool, carefully pry the console shell panel free and lift it away.

With the plastic opening tool, carefully pry the console shell panel free and lift it away.

Step 7

Using tweezers, carefully pull the multi colored bundled cable from its port connecting the fan to the console.
Carefully lift the fan and its wiring from the device.
Be mindful of damaging the wires.
Take care to keep your fingers away from the fan blades.

Using tweezers, carefully pull the multi colored bundled cable from its port connecting the fan to the console.

Carefully lift the fan and its wiring from the device.

Be mindful of damaging the wires.

Take care to keep your fingers away from the fan blades.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      7 other people completed this guide.

Author

                                      with 4 other contributors

                    Sarah Shand

Member since: 02/20/2017

1,707 Reputation

                                      7 Guides authored                  



                       Badges:
                       12







                                                        +9 more badges

Team

                       USF Tampa, Team S3-G1, Sullivan Spring 2017                        

                                                  Member of USF Tampa, Team S3-G1, Sullivan Spring 2017 



                    USFT-SULLIVAN-S17S3G1                     


                                            3 Members                     


                                            13 Guides authored

Ponos King - Oct 28, 2017

Where do I get a replacement fan tho?

crus - May 4, 2018

I think is a 3x3 cm fan, alliexpres has some, but what voltage?

Ethan Amos - Nov 21, 2019

5V is what i have read

herossuperman - Dec 30, 2020

Reference for fan when I have replaced mine : DELTA ELECTRONICS MODEL : ASB0305MA-01 DC 5V 0.19A

Introduction#

What you need#

Team#

Introduction

What you need

Team