Difficulty
Moderate
Steps
4
Time Required
Suggest a time??
Sections
2
- Back Cover
- 2 steps
- Battery
- 2 steps
Flags
0
BackPlum Optimax 10
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Back Cover
- Use a metal spudger to remove the small panels to the immediate left and right side of the camera.
Use a metal spudger to remove the small panels to the immediate left and right side of the camera.
1024
Step 2
- Use a metal spudger to begin lifting the back cover.
- Then, create leverage and gently remove the entire cover.
Use a metal spudger to begin lifting the back cover.
Then, create leverage and gently remove the entire cover.
Step 3
Battery
- Remove electrical tape placed around the battery to keep it in place.
Remove electrical tape placed around the battery to keep it in place.
Step 4
- Use the spudger as a wedge underneath the battery to assist in removal.
- Once loosened with the spudger, the battery is now removed from the device.
- Always use a plastic opening tool or nylon spudger to remove batteries. Metal tools can puncture a battery and potentially catch on fire.
Use the spudger as a wedge underneath the battery to assist in removal.
Once loosened with the spudger, the battery is now removed from the device.
Always use a plastic opening tool or nylon spudger to remove batteries. Metal tools can puncture a battery and potentially catch on fire.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 3 other contributors
Samantha Wright
Member since: 11/06/2018
243 Reputation
2 Guides authored
Badges:
5
+2 more badges
Team
IUPUI, Team S1-G4, Hovde Fall 2018
Member of IUPUI, Team S1-G4, Hovde Fall 2018
IUPUI-HOVDE-F18S1G4
3 Members
6 Guides authored