Plum Optimax 10 Motherboard Replacement Repair Guide

Difficulty

Moderate

Steps

4

Time Required

                          5 minutes            

Sections

2

• Back Cover
• 2 steps
• Motherboard
• 2 steps

Flags

0

• BackPlum Optimax 10

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Back Cover               

• Use a metal spudger to remove the small panels to the immediate left and right side of the camera.

Use a metal spudger to remove the small panels to the immediate left and right side of the camera.

1024

Step 2

• Use a metal spudger to begin lifting the back cover.
• Then, create leverage and gently remove the entire cover.

Use a metal spudger to begin lifting the back cover.

Then, create leverage and gently remove the entire cover.

Step 3

              Motherboard               

• Use flathead screwdriver tool to remove the three 2.5 mm screws shown in the photo. Two screws are located at the base of the motherboard and there is one screw located at the top.

Use flathead screwdriver tool to remove the three 2.5 mm screws shown in the photo. Two screws are located at the base of the motherboard and there is one screw located at the top.

Step 4

• Once screws are removed, carefully remove the motherboard out of encasing.

Once screws are removed, carefully remove the motherboard out of encasing.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.                                             

Author

                                      with 1 other contributor 

                    Samantha Wright                     

Member since: 11/06/2018

243 Reputation

                                      2 Guides authored                  



                       Badges:
                       5







                                                        +2 more badges                           

Team

                       IUPUI, Team S1-G4, Hovde Fall 2018                        

                                                  Member of IUPUI, Team S1-G4, Hovde Fall 2018 



                    IUPUI-HOVDE-F18S1G4                     


                                            3 Members                     


                                            6 Guides authored                     

George Earl Martin - Sep 12, 2019

Reply

This document is incomplete. It does not detail removing the cables connected to the motherboard.

Before the motherboard can be removed from the case, the Digitizer, the LCD and the power and camera cables must also be removed. the speakers, vibrator and Mic can come out with the motherboard.