Polar V800 Waterproofing Seal Replacement Repair Guide

Difficulty

Moderate

Steps

Time Required

                          15 minutes

Sections

Waterproofing Seal
3 steps

Flags

BackPolar V800
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Waterproofing Seal

In this guide, the wrist band of the Polar V800 is removed for a clear view of the back panel. If you find it helpful, you may want to remove the wrist strap. Please reference the Watch Band Replacement guide for removal instructions if you wish to do so.
Ensure your Polar V800 sports watch is powered off before continuing.
Remove the eight, 7.4 millimeter-long screws on the back of the watch with a T5 head-type, torque screwdriver.

In this guide, the wrist band of the Polar V800 is removed for a clear view of the back panel. If you find it helpful, you may want to remove the wrist strap. Please reference the Watch Band Replacement guide for removal instructions if you wish to do so.

Ensure your Polar V800 sports watch is powered off before continuing.

Remove the eight, 7.4 millimeter-long screws on the back of the watch with a T5 head-type, torque screwdriver.

1024

Step 2

Gently separate the watch housing from the back panel.
The watch should come apart easily after removing the screws. If you experience difficulties separating the housing and and back cover, use a spudger to gently pry apart the back panel and the button and screen protector housing.

Gently separate the watch housing from the back panel.

The watch should come apart easily after removing the screws. If you experience difficulties separating the housing and and back cover, use a spudger to gently pry apart the back panel and the button and screen protector housing.

Step 3

The waterproofing seal is the red, elastic band that surrounds the display of the watch.
Remove the waterproofing seal.
During reassembly, align the red seal in the groove surrounding the glass screen on the main watch housing to ensure a watertight seal.

The waterproofing seal is the red, elastic band that surrounds the display of the watch.

Remove the waterproofing seal.

During reassembly, align the red seal in the groove surrounding the glass screen on the main watch housing to ensure a watertight seal.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      5 other people completed this guide.

Author

                                      with 5 other contributors

                    Jarod Lyles

Member since: 04/18/2018

827 Reputation

                                      5 Guides authored                  



                       Badges:
                       14







                                                        +11 more badges

Team

                       Cal Poly, Team S17-G6, Livingston Spring 2018                        

                                                  Member of Cal Poly, Team S17-G6, Livingston Spring 2018 



                    CPSU-LIVINGSTON-S18S17G6                     


                                            4 Members                     


                                            8 Guides authored

Introduction#

What you need#

#

#

#

#

#

Team#

#

Introduction

What you need

Team