Difficulty
Moderate
Steps
5
Time Required
15 minutes
Sections
1
- Spread Roll
- 5 steps
Flags
0
BackPolaroid Automatic 100
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Spread Roll
- Push the lever on the bottom of the camera towards the left.
- Open the rear door of the camera.
Push the lever on the bottom of the camera towards the left.
Open the rear door of the camera.
1024
Step 2
- Unlatch the red clip on the side.
- Lift the rollers up.
- Position the camera with the back cover closest to you.
Unlatch the red clip on the side.
Lift the rollers up.
Position the camera with the back cover closest to you.
Step 3
- Remove the rear roll by using the plastic opening tool to take it off the metal frame.
- Then remove the front roll by pushing away from you with the plastic opening tool.
Remove the rear roll by using the plastic opening tool to take it off the metal frame.
Then remove the front roll by pushing away from you with the plastic opening tool.
Step 4
- Unscrew the three 2.5 mm screws (attached to the metal plate) with a 3.0 flathead screwdriver. Then take off the metal plate.
Unscrew the three 2.5 mm screws (attached to the metal plate) with a 3.0 flathead screwdriver. Then take off the metal plate.
Step 5
- Pull the support rod out.
Pull the support rod out.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 6 other contributors
Katie Miller
Member since: 04/14/2015
680 Reputation
5 Guides authored
Badges:
9
+6 more badges
Team
Cal Poly, Team 4-3, Maness Spring 2015
Member of Cal Poly, Team 4-3, Maness Spring 2015
CPSU-MANESS-S15S4G3
4 Members
6 Guides authored
