Difficulty
Easy
Steps
5
Time Required
4 - 5 minutes
Sections
1
- Flash Cover
- 5 steps
Flags
0
BackPolaroid OneStep 2
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Flash Cover
- Unscrew the four 5mm screws on the base of the camera. Remove the two pieces of the base.
Unscrew the four 5mm screws on the base of the camera. Remove the two pieces of the base.
1024
Step 2
- Unscrew the four 5mm screws on the top of the inside base piece.
- Unscrew the two 5mm screws on the bottom of the inside base piece which is near the strap.
Unscrew the four 5mm screws on the top of the inside base piece.
Unscrew the two 5mm screws on the bottom of the inside base piece which is near the strap.
Step 3
- Remove the inside black base piece.
Remove the inside black base piece.
Step 4
- With force separate the front white piece from the back of the camera. You will use your hands to pull it apart.
With force separate the front white piece from the back of the camera. You will use your hands to pull it apart.
Step 5
- Forcefully pull on the flash cover until it is removed.
Forcefully pull on the flash cover until it is removed.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
2 other people completed this guide.
Author
with 6 other contributors
Abby Boucher
Member since: 09/10/2018
784 Reputation
5 Guides authored
Badges:
10
+7 more badges
Team
University of Alabama, Team S1-G1, Bedsole Fall 2018
Member of University of Alabama, Team S1-G1, Bedsole Fall 2018
UA-BEDSOLE-F18S1G1
4 Members
5 Guides authored
