Difficulty
Moderate
Steps
5
Time Required
5 - 7 minutes
Sections
1
- Shutter Switch
- 5 steps
Flags
0
BackPolaroid OneStep 2
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Shutter Switch
- Remove the four 5mm screws on the base of the camera using a Phillips #0 screwdriver.
- Remove the two pieces of the base.
Remove the four 5mm screws on the base of the camera using a Phillips #0 screwdriver.
Remove the two pieces of the base.
1024
Step 2
- Remove the four 5mm screws on the top of the inside base piece using a Phillips #0 screwdriver.
- Remove the two 5mm screws on the bottom of the inside base piece which is near the strap with the same screwdriver.
Remove the four 5mm screws on the top of the inside base piece using a Phillips #0 screwdriver.
Remove the two 5mm screws on the bottom of the inside base piece which is near the strap with the same screwdriver.
Step 3
- Remove the black inside base piece.
Remove the black inside base piece.
Step 4
- With force separate the white front piece from the back of the camera. You will use your hands and pull it apart.
With force separate the white front piece from the back of the camera. You will use your hands and pull it apart.
Step 5
- With force pull the shutter button away from the white piece of the camera.
With force pull the shutter button away from the white piece of the camera.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
2 other people completed this guide.
Author
with 4 other contributors
Abby Boucher
Member since: 09/10/2018
784 Reputation
5 Guides authored
Badges:
10
+7 more badges
Team
University of Alabama, Team S1-G1, Bedsole Fall 2018
Member of University of Alabama, Team S1-G1, Bedsole Fall 2018
UA-BEDSOLE-F18S1G1
4 Members
5 Guides authored
