Polaroid Onestep Close Up Primary Lens Replacement Repair Guide

Difficulty

Moderate

Steps

5

Time Required

Suggest a time??

Sections

2

• Face Plate
• 3 steps
• Primary Lens
• 2 steps

Flags

0

• BackPolaroid OneStep 600 Close Up

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Flash Assembly Removal               

• Begin by opening the top of the camera (flash assembly) to a slight angle.
• Next, angle the flash assembly slightly upward and pry off the connections carefully.
• Be careful not to damage the ribbon cable. This is essential to the operation of the flash.

Begin by opening the top of the camera (flash assembly) to a slight angle.

Next, angle the flash assembly slightly upward and pry off the connections carefully.

Be careful not to damage the ribbon cable. This is essential to the operation of the flash.

1024

Step 2

              Opening Film Tray               

• Slide the action button, on the bottom of the camera, to open the bottom.

Slide the action button, on the bottom of the camera, to open the bottom.

Step 3

              Removing Face Plate               

• Insert the blue plastic opening tool between the rear case and the plastic tabs directly under the shelf, and pry it loose.
• Pull off the face plate.

Insert the blue plastic opening tool between the rear case and the plastic tabs directly under the shelf, and pry it loose.

Pull off the face plate.

Step 4

              Primary Lens               

• Once the front assembly is removed, the primary lens should be exposed without any trouble.

Once the front assembly is removed, the primary lens should be exposed without any trouble.

Step 5

              Removal of primary lens               

• Use your spudger to leverage the lens from the groove at the top (red).
• Pry the lens loose. It may pop out, so have a method in place to prevent it from dropping.

Use your spudger to leverage the lens from the groove at the top (red).

Pry the lens loose. It may pop out, so have a method in place to prevent it from dropping.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      3 other people completed this guide.                                             

Author

                                      with 3 other contributors 

                    Christopher Collazo                     

Member since: 09/22/2014

318 Reputation

                                      2 Guides authored                  



                       Badges:
                       8







                                                        +5 more badges                           

Team

                       USF Tampa, Team 3-5, Brown Fall 2014                        

                                                  Member of USF Tampa, Team 3-5, Brown Fall 2014 



                    USFT-BROWN-F14S3G5                     


                                            3 Members                     


                                            6 Guides authored