Difficulty
Moderate
Steps
5
Time Required
Suggest a time??
Sections
1
- Battery
- 5 steps
Flags
Incorrect Tools
Help make this guide better by using the correct tools in images and/or text.
BackPolaroid PMID4312
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Battery
- Pry the seam between the screen and the case and slide it on all four sides with a large plastic opening tool until the plastic case comes off.
Pry the seam between the screen and the case and slide it on all four sides with a large plastic opening tool until the plastic case comes off.
1024
Step 2
- Lift the device off of the case and flip over the device so that it sits screen side down.
Lift the device off of the case and flip over the device so that it sits screen side down.
Step 3
- The device is now free from the plastic case.
The device is now free from the plastic case.
Step 4
- Wedge a plastic card beneath the battery unit and wiggle the card side to side and up and down gently until the glue sealing the battery to the device is broken.
Wedge a plastic card beneath the battery unit and wiggle the card side to side and up and down gently until the glue sealing the battery to the device is broken.
Step 5
- Peel back any yellow tape not directly attached to the battery.
- Using a soldering iron, desolder the two wires that connect the battery to the motherboard.
Peel back any yellow tape not directly attached to the battery.
Using a soldering iron, desolder the two wires that connect the battery to the motherboard.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 3 other contributors
Christopher Bertan
Member since: 10/06/2016
479 Reputation
4 Guides authored
Badges:
8
+5 more badges
Team
USF Tampa, Team 5-4, Lacy Fall 2016
Member of USF Tampa, Team 5-4, Lacy Fall 2016
USFT-LACY-F16S5G4
4 Members
10 Guides authored
