Polaroid Pmid4312 Speaker Replacement Repair Guide

Difficulty

Moderate

Steps

8

Time Required

                          5 minutes            

Sections

2

• Battery
• 5 steps
• Speaker
• 3 steps

Flags

1

Incorrect Tools

Help make this guide better by using the correct tools in images and/or text.

• BackPolaroid p916r

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Battery               

• Pry the seam between the screen and the case and slide it on all four sides with a large plastic opening tool until the plastic case comes off.

Pry the seam between the screen and the case and slide it on all four sides with a large plastic opening tool until the plastic case comes off.

1024

Step 2

• Lift the device off of the case and flip over the device so that it sits screen side down.

Lift the device off of the case and flip over the device so that it sits screen side down.

Step 3

• The device is now free from the plastic case.

The device is now free from the plastic case.

Step 4

• Wedge a plastic card beneath the battery unit and wiggle the card side to side and up and down gently until the glue sealing the battery to the device is broken.

Wedge a plastic card beneath the battery unit and wiggle the card side to side and up and down gently until the glue sealing the battery to the device is broken.

Step 5

• Peel back any yellow tape not directly attached to the battery.
• Using a soldering iron, desolder the two wires that connect the battery to the motherboard.

Peel back any yellow tape not directly attached to the battery.

Using a soldering iron, desolder the two wires that connect the battery to the motherboard.

Step 6

              Speaker               

• Remove the two 5mm screws attached to the top right and bottom left corners of the speaker

Remove the two 5mm screws attached to the top right and bottom left corners of the speaker

Step 7

• Solder off the wires connecting the speaker to the device

Solder off the wires connecting the speaker to the device

Step 8

• Pull the speaker out of the casing to release it.

Pull the speaker out of the casing to release it.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors 

                    Christopher Bertan                     

Member since: 10/06/2016

479 Reputation

                                      4 Guides authored                  



                       Badges:
                       8







                                                        +5 more badges                           

Team

                       USF Tampa, Team 5-4, Lacy Fall 2016                        

                                                  Member of USF Tampa, Team 5-4, Lacy Fall 2016 



                    USFT-LACY-F16S5G4                     


                                            4 Members                     


                                            10 Guides authored                     

Christopher Bertan - Nov 21, 2016

Reply

WOW so helpful!!