Difficulty

Moderate

Steps

5

Time Required

                          5 - 10 minutes

Sections

1

  • Panel
  • 5 steps

Flags

0

  • BackPolaroid PMID701i 10

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Panel
  • Turn off and unplug the device before starting replacement.
  • Flip the device so that the screen faces down, with the back facing up.
  • The back panel attaches to the device with four 4.0mm long screws, one at each corner, indicated by the red circles in the picture.
  • Unscrew the four screws with a PH000 screwdriver.

Turn off and unplug the device before starting replacement.

Flip the device so that the screen faces down, with the back facing up.

The back panel attaches to the device with four 4.0mm long screws, one at each corner, indicated by the red circles in the picture.

Unscrew the four screws with a PH000 screwdriver.

1024

Step 2

  • Flip the device over so that the screen faces up, and the back faces down.
  • Separate the front panel using the Opening Tool on a corner to create an opening.
  • Removing the frame for the first time may take a significant amount of force.
  • Run the tool along the seams of the device to open up all the sides.

Flip the device over so that the screen faces up, and the back faces down.

Separate the front panel using the Opening Tool on a corner to create an opening.

Removing the frame for the first time may take a significant amount of force.

Run the tool along the seams of the device to open up all the sides.

Step 3

  • Removing the panel too quickly may damage the cable that attaches parts between the two panels.
  • Gently lift the top panel from the bottom panel.

Removing the panel too quickly may damage the cable that attaches parts between the two panels.

Gently lift the top panel from the bottom panel.

Step 4

  • The flexible flat cables (FFC) attach to parts in the bottom panel with zero insertion force (ZIF) connectors.
  • Use the Opening tool to flip up the black retaining flap on the smaller connector.
  • Gently lift the cable, parallel to the panel, to detach it.

The flexible flat cables (FFC) attach to parts in the bottom panel with zero insertion force (ZIF) connectors.

Use the Opening tool to flip up the black retaining flap on the smaller connector.

Gently lift the cable, parallel to the panel, to detach it.

Step 5

  • Use the Opening tool to flip up the black retaining flap on the larger connector.
  • Gently lift the cable, parallel to the panel, to detach it.

Use the Opening tool to flip up the black retaining flap on the larger connector.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 2 other contributors 


                    Amy Li

Member since: 01/31/2017

627 Reputation

                                      5 Guides authored                  



                       Badges:
                       8







                                                        +5 more badges

Team

                       Baylor, Team 3-4, Whitney Spring 2017                        

                                                  Member of Baylor, Team 3-4, Whitney Spring 2017 



                    BU-WHITNEY-S17S3G4                     


                                            3 Members                     


                                            10 Guides authored