Difficulty

Easy

Steps

6

Time Required

                          10 minutes            

Sections

1

  • Lens
  • 6 steps

Flags

0

  • BackPolaroid Sun 600 LMS

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Lens               
  • Move film door slide on the left side of camera forward.
  • Pull film door open.

Move film door slide on the left side of camera forward.

Pull film door open.

1024

Step 2

  • Open the flash assembly by holding the sides of the top piece of the camera and pushing up gently until it snaps into place.
  • If your camera is old or dirty, it may take more force to open the flash assembly.

Open the flash assembly by holding the sides of the top piece of the camera and pushing up gently until it snaps into place.

If your camera is old or dirty, it may take more force to open the flash assembly.

Step 3

  • Use a spudger on each side to separate the flash segment from the main body.
  • Be careful not to do this too hard because you may pull out the connecting wires.

Use a spudger on each side to separate the flash segment from the main body.

Be careful not to do this too hard because you may pull out the connecting wires.

Step 4

  • Use several plastic opening tools around the edges of the camera’s body to separate it from the plastic frame.

Use several plastic opening tools around the edges of the camera’s body to separate it from the plastic frame.

Step 5

  • Place left hand on the gray section and right hand on the black section.
  • Pull the sections apart.

Place left hand on the gray section and right hand on the black section.

Pull the sections apart.

Step 6

  • Carefully remove the damaged lens from the interior of the camera.
  • Replace with a new lens.

Carefully remove the damaged lens from the interior of the camera.

Replace with a new lens.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.                                             

Author

                                      with 5 other contributors 

                    Ian Hosek                     

Member since: 01/20/2010

357 Reputation

                                      1 Guide authored                  



                       Badges:
                       9







                                                        +6 more badges                           

Team

                       Cal Poly, Team 3-18, Maness Winter 2010                        

                                                  Member of Cal Poly, Team 3-18, Maness Winter 2010 



                    CPSU-MANESS-W10S3G18                     


                                            4 Members                     


                                            4 Guides authored