Difficulty
Easy
Steps
3
Time Required
10 - 20 minutes
Sections
1
- Control Panel Replacement
- 3 steps
Flags
0
BackPolaroid Z2300
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Control Panel Replacement
- Locate and remove the two 2.5 mm long screws on the bottom of the camera.
- Screw head: JIS J00
- The screws are very small, be careful not to strip or lose them!
Locate and remove the two 2.5 mm long screws on the bottom of the camera.
Screw head: JIS J00
The screws are very small, be careful not to strip or lose them!
1024
Step 2
- Once the two screws are removed, flip the camera to back side up.
- Use a plastic opening tool to disengage the outer plastic trim until it can be safely removed.
Once the two screws are removed, flip the camera to back side up.
Use a plastic opening tool to disengage the outer plastic trim until it can be safely removed.
Step 3
- Use a plastic opening tool to pop the control panel off, it should be easy to lift up and remove.
Use a plastic opening tool to pop the control panel off, it should be easy to lift up and remove.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 3 other contributors
Bradley Marcum
Member since: 11/01/2018
217 Reputation
2 Guides authored
Badges:
3
Team
IUPUI, Team S2-G1, Harley Fall 2018
Member of IUPUI, Team S2-G1, Harley Fall 2018
IUPUI-HARLEY-F18S2G1
3 Members
4 Guides authored
