Difficulty
Easy
Steps
5
Time Required
10 - 15 minutes
Sections
1
- Screen
- 5 steps
Flags
0
BackPolaroid Z2300
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Screen
- Flip the camera to back side up and open the paper/screen door.
Flip the camera to back side up and open the paper/screen door.
1024
Step 2
- Locate and remove the two 3.5 mm long screws on the inside tray.
- Screw head: JIS J00
- Remove the inside tray.
- The screws are very small! Be careful not to strip or lose them.
Locate and remove the two 3.5 mm long screws on the inside tray.
Screw head: JIS J00
Remove the inside tray.
The screws are very small! Be careful not to strip or lose them.
Step 3
- Gently pull the ribbon away from the logic board. This will allow the screen to separate from the rest of the camera.
Gently pull the ribbon away from the logic board. This will allow the screen to separate from the rest of the camera.
Step 4
- Locate and remove four 3.5 mm long screws on the inside of the door.
- Screw head: JIS J00
- The screws are very small! Be careful not to strip or lose them.
Locate and remove four 3.5 mm long screws on the inside of the door.
Step 5
- Once the panel is removed, the malfunctioning screen will slide out and can be replaced.
Once the panel is removed, the malfunctioning screen will slide out and can be replaced.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 2 other contributors
Bradley Marcum
Member since: 11/01/2018
217 Reputation
2 Guides authored
Badges:
3
Team
IUPUI, Team S2-G1, Harley Fall 2018
Member of IUPUI, Team S2-G1, Harley Fall 2018
IUPUI-HARLEY-F18S2G1
3 Members
4 Guides authored
mooi1uk - Mar 29, 2019
Reply
Where can I buy a replacement screen please?