Difficulty

Moderate

Steps

4

Time Required

                          10 minutes

Sections

1

  • Bluetooth Cable
  • 4 steps

Flags

Incorrect Tools

Help make this guide better by using the correct tools in images and/or text.

  • BackPolk MagniFi Soundbar

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Bluetooth Cable
  • To reveal the control button, first, carefully remove the front cover of the Sound Bar.
  • Use the plastic iFixit opening tool to lift up the front surface. Insert the tool between the cover and the body to open it.
  • After the cover is fully removed, it will be able to see the interior speaker.
  • Carefully unscrew all 16 screws to release the panel.
  • There are total 16 screws that secures the panel onto the cover. Each screw is approximately 1.50 centimeter.

To reveal the control button, first, carefully remove the front cover of the Sound Bar.

Use the plastic iFixit opening tool to lift up the front surface. Insert the tool between the cover and the body to open it.

After the cover is fully removed, it will be able to see the interior speaker.

Carefully unscrew all 16 screws to release the panel.

There are total 16 screws that secures the panel onto the cover. Each screw is approximately 1.50 centimeter.

1024

Step 2

  • To remove the cover behind the control buttons, insert the iFixit opening tool between the cover and the body
  • Push the opening tool along the edge of the cover to fully open it.

To remove the cover behind the control buttons, insert the iFixit opening tool between the cover and the body

Push the opening tool along the edge of the cover to fully open it.

Step 3

  • Underneath the cover, there is a black panel screwed onto the cover with two sets of wires plugged into it.

Underneath the cover, there is a black panel screwed onto the cover with two sets of wires plugged into it.

Step 4

  • Grasp the wire firmly close to the base and pull straight out. Repeat this for the other end of the wire.
  • This wire is easily broken. Handle with care.

Grasp the wire firmly close to the base and pull straight out. Repeat this for the other end of the wire.

This wire is easily broken. Handle with care.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 3 other contributors 


                    [deleted]

Member since: 10/22/2018

635 Reputation

                                      4 Guides authored                  



                       Badges:
                       6







                                                        +3 more badges