Difficulty

Moderate

Steps

5

Time Required

                          20 - 45 minutes

Sections

1

  • Control Buttons
  • 5 steps

Flags

Incorrect Tools

Help make this guide better by using the correct tools in images and/or text.

  • BackPolk MagniFi Soundbar

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Control Buttons
  • To reveal the control button, first, carefully remove the front cover of the Sound Bar.
  • Use the plastic iFixit opening tool to lift up the front surface. Insert the tool between the cover and the body to open it.
  • The front cover is bendable. Remove it carefully with plastic tool to keep its shape and structure.
  • After the cover is fully removed, it will be able to see the interior speaker.
  • Remove all screws from the front surface. all screws are approximately 1.50 centimeters.

To reveal the control button, first, carefully remove the front cover of the Sound Bar.

Use the plastic iFixit opening tool to lift up the front surface. Insert the tool between the cover and the body to open it.

The front cover is bendable. Remove it carefully with plastic tool to keep its shape and structure.

After the cover is fully removed, it will be able to see the interior speaker.

Remove all screws from the front surface. all screws are approximately 1.50 centimeters.

1024

Step 2

  • To remove the cover behind the control buttons, insert the iFixit opening tool between the cover and the body.
  • Push the opening tool along the edge of the cover to fully open it.

To remove the cover behind the control buttons, insert the iFixit opening tool between the cover and the body.

Push the opening tool along the edge of the cover to fully open it.

Step 3

  • Underneath the cover, there is a black panel screwed onto the cover with two sets of wires plugged into it.
  • To remove the wire attached to the panel, firmly grasp the wires at the base (image 2) and pull them straight up.
  • This component is fragile. This step needs to be done carefully.

Underneath the cover, there is a black panel screwed onto the cover with two sets of wires plugged into it.

To remove the wire attached to the panel, firmly grasp the wires at the base (image 2) and pull them straight up.

This component is fragile. This step needs to be done carefully.

Step 4

  • There are total 6 screws that secures the control panel and the control buttons onto the cover. Each screw is approximately 0.50 centimeter.
  • Carefully unscrew all 6 screws to release the control panel.
  • Serial numbers and model can be found on the control panel.

There are total 6 screws that secures the control panel and the control buttons onto the cover. Each screw is approximately 0.50 centimeter.

Carefully unscrew all 6 screws to release the control panel.

Serial numbers and model can be found on the control panel.

Step 5

  • After release the control panel from the back cover, the button will fall right off from the back cover.
  • The button now is completely detached and and ready for cleaning.
  • Clean the button with paper or brush to make sure it is not stacked or dirty.

After release the control panel from the back cover, the button will fall right off from the back cover.

The button now is completely detached and and ready for cleaning.

Clean the button with paper or brush to make sure it is not stacked or dirty.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 3 other contributors 


                    [deleted]

Member since: 10/22/2018

635 Reputation

                                      4 Guides authored                  



                       Badges:
                       6







                                                        +3 more badges

Lad Lennon Ababon Lopez - Feb 4, 2020

Reply

My pollk is working but there is no sound coming out it connect the Bluetooth and wifi but my problem is there is no sound coming