Difficulty
Easy
Steps
3
Time Required
5 - 10 minutes
Sections
1
- Antenna
- 3 steps
Flags
0
BackPolyconcept 900-MHz Device
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Removing the Antenna Screw
- Inside the base cover, locate the screw holding the antenna in place and use a Philips #00 screwdriver to remove the 6mm screw.
Inside the base cover, locate the screw holding the antenna in place and use a Philips #00 screwdriver to remove the 6mm screw.
1024
Step 2
Removing the Antenna Foot
- Grasp the plastic antenna foot and pull toward you.
Grasp the plastic antenna foot and pull toward you.
Step 3
Removing the Antenna
- Pull antenna from the top side of the phone base cover.
- It helps if you gently wiggle the antenna back and forth to loosen the clips.
Pull antenna from the top side of the phone base cover.
It helps if you gently wiggle the antenna back and forth to loosen the clips.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 2 other contributors
Tia
Member since: 10/27/2014
451 Reputation
3 Guides authored
Badges:
9
+6 more badges
Team
Eastern Washington University, Team 1-1, Carnegie Fall 2014
Member of Eastern Washington University, Team 1-1, Carnegie Fall 2014
EWU-CARNEGIE-F14S1G1
6 Members
12 Guides authored
