Difficulty
Easy
Steps
4
Time Required
5 - 10 minutes
Sections
1
- Screen
- 4 steps
Flags
0
BackPortege Z830-S8302
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Screen
- Use a plastic opening tool to gently pry plastic frame from screen. Detach all housing clips around the perimeter of the screen.
Use a plastic opening tool to gently pry plastic frame from screen. Detach all housing clips around the perimeter of the screen.
1024
Step 2
- Remove two 3mm screws with a Phillips #000 screwdriver.
Remove two 3mm screws with a Phillips #000 screwdriver.
Step 3
- Wedge a blue plastic opening tool between the screen and the frame to free the screen.
- Do not fully remove screen as it is still attached by connector cable on bottom
Wedge a blue plastic opening tool between the screen and the frame to free the screen.
Do not fully remove screen as it is still attached by connector cable on bottom
Step 4
- Disconnect the display cable with your fingers to fully remove the screen from the device.
Disconnect the display cable with your fingers to fully remove the screen from the device.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 3 other contributors
Tanner Krygier
Member since: 09/17/2018
898 Reputation
5 Guides authored
Badges:
9
+6 more badges
Team
Washington State, Team S2-G7, Hope Fall 2018
Member of Washington State, Team S2-G7, Hope Fall 2018
WSU-HOPE-F18S2G7
3 Members
10 Guides authored
