Difficulty
Moderate
Steps
9
Time Required
Suggest a time??
Sections
1
- Porter Cable 20v battery Disassembly
- 9 steps
Flags
2
In Progress
This guide is a work in progress. Reload periodically to see the latest changes!
Member-Contributed Guide
An awesome member of our community made this guide. It is not managed by iFixit staff.
BackPorter Cable 20v battery
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Step 1
Remove 4 T10 safety screws on bottom
- Warning: be very careful not to short or overheat the batteries as this can cause a fire.
Warning: be very careful not to short or overheat the batteries as this can cause a fire.
1024
Step 2
Split casing in the back by locking clip
- Insert wisdom here.
Insert wisdom here.
Step 3
Remove battery bank and PCB from outer casing
Step 4
Remove spot-welded 18650 batter contacts
- DO NOT SHORT THE POSITIVE(SMALL SIDE) WITH OUTER CASING
DO NOT SHORT THE POSITIVE(SMALL SIDE) WITH OUTER CASING
Step 5
Remove all batteries prying off glue gently
Step 6
Spot weld I you have one),solder(can be risky causing short) or bend the pins back to have solid contact with battery
- If solder you must score the ends of the batter so it stick better
If solder you must score the ends of the batter so it stick better
Step 7
Tape or glue batteries in place firmly
Step 8
Place battery assembly back into case making sure to put locking clip back in
Step 9
Screw case shut and test with charger
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 1 other contributor
Tyler Conner
Member since: 02/01/2021
169 Reputation
1 Guide authored
Badges:
1