Difficulty
Moderate
Steps
2
Time Required
Suggest a time??
Sections
1
- Sander Pad
- 2 steps
Flags
Better Introduction
Improve this guide by completing or revising its introduction.
BackPorter-Cable 382
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
What you need
Step 1
Sander Pad
- When changing the sander pad, be sure to rotate the sander upside down so the pad and three highlighted screws are facing upward toward you.
- Once the sander is upside down begin by removing your old sandpaper.
- Once the sandpaper is removed locate the three screws on your sander pad.
When changing the sander pad, be sure to rotate the sander upside down so the pad and three highlighted screws are facing upward toward you.
Once the sander is upside down begin by removing your old sandpaper.
Once the sandpaper is removed locate the three screws on your sander pad.
1024
Step 2
- Remove the three, (star bolt) screws with the iFixit screw driver with a “T20” head. Be sure to hold the pad of the sander as it will rotate as you try to loosen the screws.
- Once the screws are removed pull upward toward you and the sander pad will come apart from the device.
Remove the three, (star bolt) screws with the iFixit screw driver with a “T20” head. Be sure to hold the pad of the sander as it will rotate as you try to loosen the screws.
Once the screws are removed pull upward toward you and the sander pad will come apart from the device.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 2 other contributors
Nick O'Sadcia
Member since: 03/11/2016
421 Reputation
3 Guides authored
Badges:
6
+3 more badges
Team
UMass Dartmouth, Team 8-7, Botvin Spring 2016
Member of UMass Dartmouth, Team 8-7, Botvin Spring 2016
UMASSD-BOTVIN-S16S8G7
3 Members
4 Guides authored
