Porter Cable Pc60Tag Power Switch Replacement Repair Guide

Difficulty

Moderate

Steps

7

Time Required

                          10 minutes            

Sections

1

• Power Switch
• 7 steps

Flags

Slice and Dice

The steps in this guide should be split up and made into a series of prerequisite guides.

• BackPorter-Cable PC60TAG

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Power Switch               

• Using the Phillips #2 screwdriver, remove the 3/4" Phillips screw on the back cover.
• Unplug the grinder before disassembling.

Using the Phillips #2 screwdriver, remove the 3/4" Phillips screw on the back cover.

Unplug the grinder before disassembling.

1024

Step 2

• Holding the front of the device, carefully slide the back cover over the cord.

Holding the front of the device, carefully slide the back cover over the cord.

Step 3

• Using the Phillips #2 screwdriver, loosen, but do not remove, the two terminal screws securing the black and white wires from the power cord.

Using the Phillips #2 screwdriver, loosen, but do not remove, the two terminal screws securing the black and white wires from the power cord.

Step 4

• Careful remove each wire from the power cord from underneath the terminals.

Careful remove each wire from the power cord from underneath the terminals.

Step 5

• Using the spudger, carefully push the red power switch out of the device.

Using the spudger, carefully push the red power switch out of the device.

Step 6

• From the other side of the device, use the spudger to carefully pry out power switch away from the device.

From the other side of the device, use the spudger to carefully pry out power switch away from the device.

Step 7

• Using your fingers, carefully remove each of the gold terminals from the power switch. You may need to gently wiggle the terminal back and forth in order to remove it.

Using your fingers, carefully remove each of the gold terminals from the power switch. You may need to gently wiggle the terminal back and forth in order to remove it.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 1 other contributor 

                    Mackenzie Fairbanks                     

Member since: 03/24/2016

564 Reputation

                                      5 Guides authored                  



                       Badges:
                       10







                                                        +7 more badges                           

Team

                       UMass Dartmouth, Team 2-2, Isaacson Spring 2016                        

                                                  Member of UMass Dartmouth, Team 2-2, Isaacson Spring 2016 



                    UMASSD-ISAACSON-S16S2G2                     


                                            3 Members                     


                                            5 Guides authored