Difficulty
Moderate
Steps
2
Time Required
5 minutes
Sections
1
- Airport Card
- 2 steps
Flags
Needs Better Images
Better photos will improve this guide. Help out by taking, editing, or uploading new ones!
BackPower Mac G4 Cube
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
Step 1
Remove Cube Core
- Release the handle at the bottom of the Power Mac G4 Cube by pushing it down. Slowly pull out the cube by holding the end of the handle.
- Watch for any parts that may become entangled with the outer case.
- Push back the handle after you have taken the core out of the case.
Release the handle at the bottom of the Power Mac G4 Cube by pushing it down. Slowly pull out the cube by holding the end of the handle.
Watch for any parts that may become entangled with the outer case.
Push back the handle after you have taken the core out of the case.
1024
Step 2
Accessing AirPort Card
- Pull outwards on the antenna cable.
- The cable should pop out of the card without much force.
- Pull on the clear tab outwards to remove the existing AirPort card
- Slide in the new AirPort card.
- Reconnect the antenna cable.
Pull outwards on the antenna cable.
The cable should pop out of the card without much force.
Pull on the clear tab outwards to remove the existing AirPort card
Slide in the new AirPort card.
Reconnect the antenna cable.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
8 other people completed this guide.
Author
with 5 other contributors
Ryan Chun
Member since: 06/24/2010
1,055 Reputation
7 Guides authored
Badges:
12
+9 more badges
Team
Cal Poly, Team 2-7, Johann Summer 2010
Member of Cal Poly, Team 2-7, Johann Summer 2010
CPSU-JOHANN-R10S2G7
5 Members
8 Guides authored