Difficulty

Moderate

Steps

6

Time Required

                          5 minutes            

Sections

2

  • Outer Case
  • 4 steps
  • Optical Drive
  • 2 steps

Flags

0

  • BackPower Mac G4 Cube

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Outer Case               
  • Release the back handle of the PowerMac. Slowly pull out the cube by holding the end of the handle. Watch for any parts that may become entangled with the outer case.
  • Push back the handle after you have taken the core out of the case.

Release the back handle of the PowerMac. Slowly pull out the cube by holding the end of the handle. Watch for any parts that may become entangled with the outer case.

Push back the handle after you have taken the core out of the case.

1024

Step 2

  • Place the cube upside down and remove the four T10 Torx screws on the front plate. Then remove the two screws on each side.

Place the cube upside down and remove the four T10 Torx screws on the front plate. Then remove the two screws on each side.

Step 3

  • Slowly lift the plate off the cube and disconnect the power cord.

Slowly lift the plate off the cube and disconnect the power cord.

Step 4

  • Remove the four pillars from each corner.
  • The pillars should come out fairly easily.

Remove the four pillars from each corner.

The pillars should come out fairly easily.

Step 5

              Optical Drive               
  • Remove a total of four screws on the sides of the optical drive.

Remove a total of four screws on the sides of the optical drive.

Step 6

  • Slowly lift up the optical drive and remove the IDE cable.
  • Remove the power cable.

Slowly lift up the optical drive and remove the IDE cable.

Remove the power cable.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      11 other people completed this guide.                                             

Author

                                      with 5 other contributors 

                    Ryan Chun                     

Member since: 06/24/2010

1,055 Reputation

                                      7 Guides authored                  



                       Badges:
                       12







                                                        +9 more badges                           

Team

                       Cal Poly, Team 2-7, Johann Summer 2010                        

                                                  Member of Cal Poly, Team 2-7, Johann Summer 2010 



                    CPSU-JOHANN-R10S2G7                     


                                            5 Members                     


                                            8 Guides authored