Difficulty
Very easy
Steps
5
Time Required
10 minutes
Sections
2
- Opening PowerMac G4 M5183 Case
- 1 step
- Hard Drive
- 4 steps
Flags
0
BackPower Mac G4 M5183
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Opening PowerMac G4 M5183 Case
- Pull on outer latch.
- Lower door until it is level with your work surface.
- Before working on the computer make sure it is not plugged into a power supply, then touch a metal object. This discharges static electricity, which could damage the computer.
Pull on outer latch.
Lower door until it is level with your work surface.
Before working on the computer make sure it is not plugged into a power supply, then touch a metal object. This discharges static electricity, which could damage the computer.
1024
Step 2
Hard Drive
- Remove the ribbon cable and power cable from the Hard Drive.
Remove the ribbon cable and power cable from the Hard Drive.
Step 3
- Remove the screw which holds the Hard Drive tray in place.
Remove the screw which holds the Hard Drive tray in place.
Step 4
- Slide the Hard Drive tray out of the computer.
Slide the Hard Drive tray out of the computer.
Step 5
- To remove the Hard Drive from the tray, unscrew the 4 screws on the bottom of the tray.
To remove the Hard Drive from the tray, unscrew the 4 screws on the bottom of the tray.
Cancel: I did not complete this guide.
35 other people completed this guide.
Author
with 4 other contributors
Justin Petrilli
Member since: 01/21/2010
3,075 Reputation
11 Guides authored
Badges:
14
+11 more badges
Team
Cal Poly, Team 13-24, Maness Winter 2010
Member of Cal Poly, Team 13-24, Maness Winter 2010
CPSU-MANESS-W10S13G24
4 Members
25 Guides authored