Difficulty
Easy
Steps
7
Time Required
5 - 10 minutes
Sections
2
- Opening the case
- 3 steps
- Video Adapter
- 4 steps
Flags
0
BackPower Mac G4 Quicksilver
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Opening the case
- The handle to open your computer is located on top of the right side panel.
The handle to open your computer is located on top of the right side panel.
1024
Step 2
- Grab the circular handle and pull outward.
Grab the circular handle and pull outward.
Step 3
- Your computer is now open and ready for repair.
Your computer is now open and ready for repair.
Step 4
Video Adapter
- This is your Power Mac G4’s video adapter.
This is your Power Mac G4’s video adapter.
Step 5
- Start by removing the screw holding the card to the chassis as shown.
Start by removing the screw holding the card to the chassis as shown.
Step 6
- Before lifting the card out, this small plastic tab needs to be pulled back there by releasing it entirely.
Before lifting the card out, this small plastic tab needs to be pulled back there by releasing it entirely.
Step 7
- With the tab and screw removed, lift the card straight out.
- When putting the card back in, take care to apply even pressure across the top with your thumbs. This will avoid damaging the card.
With the tab and screw removed, lift the card straight out.
When putting the card back in, take care to apply even pressure across the top with your thumbs. This will avoid damaging the card.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
7 other people completed this guide.
Author
with 2 other contributors
Cameron Christensen
Member since: 01/20/2010
590 Reputation
3 Guides authored
Badges:
12
+9 more badges
Team
Cal Poly, Team 14-41, Regan Winter 2010
Member of Cal Poly, Team 14-41, Regan Winter 2010
CPSU-REGAN-W10S14G41
4 Members
17 Guides authored