Difficulty

Easy

Steps

3

Time Required

                          5 - 10 minutes

Sections

1

  • Graphics Card
  • 3 steps

Flags

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

  • BackPower Macintosh G3 (Blue and White)

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

What you need

Step 1

              Graphics Card
  • Unfortunately, I am unable to provide OG content for this step due to my PowerMac’s outer case being severely damaged. Once I get my new outer case I will update this step.
  • Lift the latch on the right side panel to reveal the internals.
  • If you are doing this on a hard surface I highly suggest you put a mat down between the door and the ground to prevent scratches.

Unfortunately, I am unable to provide OG content for this step due to my PowerMac’s outer case being severely damaged. Once I get my new outer case I will update this step.

Lift the latch on the right side panel to reveal the internals.

If you are doing this on a hard surface I highly suggest you put a mat down between the door and the ground to prevent scratches.

1024

Step 2

  • Remove the single Phillips #1 screw circled in the picture. Set it aside for later.
  • The graphics card is outlined in red in the second image, if you are confused on where this is.

Remove the single Phillips #1 screw circled in the picture. Set it aside for later.

The graphics card is outlined in red in the second image, if you are confused on where this is.

Step 3

  • Lift the graphics card straight out of it’s PCI slot.
  • Be careful not to lift sideways, you can damage the PCI slot! Try your best to lift the graphics card straight up.

Lift the graphics card straight out of it’s PCI slot.

Be careful not to lift sideways, you can damage the PCI slot! Try your best to lift the graphics card straight up.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.

Author

                                      with 1 other contributor 


                    [deleted]

Member since: 08/28/2018

24,746 Reputation

                                      21 Guides authored                  



                       Badges:
                       50







                                                        +47 more badges