Difficulty

Easy

Steps

3

Time Required

Suggest a time??

Sections

  • Side Access Panel
  • 1 step
  • Floppy Drive Bezel
  • 1 step
  • Floppy Drive Shield
  • 1 step

Flags

In Progress

This guide is a work in progress. Reload periodically to see the latest changes!

Needs More Images

A few more images would make this guide’s procedures crystal clear.

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

  • BackPower Macintosh G3 (Minitower)

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

What you need

Step 1

              Side Access Panel
  • Press the green release button on top of the side access panel.
  • Pull off the side access panel to get inside the computer.
  • When putting the side access panel back on, make sure that the bottom of the panel lines up with the rail on the bottom, and that the chassis is locked with the green latches.

Press the green release button on top of the side access panel.

Pull off the side access panel to get inside the computer.

When putting the side access panel back on, make sure that the bottom of the panel lines up with the rail on the bottom, and that the chassis is locked with the green latches.

1024

Step 2

              Floppy Drive Bezel
  • Gently pry up the tab on the left side of the floppy drive bezel.
  • Swing the bezel open.
  • Remove the bezel from the right edge of the floppy drive.

Gently pry up the tab on the left side of the floppy drive bezel.

Swing the bezel open.

Remove the bezel from the right edge of the floppy drive.

Step 3

              Floppy Drive Shield
  • Using a Phillips screwdriver, remove the two floppy drive shield screws.
  • Remove the floppy drive shield.

Using a Phillips screwdriver, remove the two floppy drive shield screws.

Remove the floppy drive shield.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 1 other contributor 


                    LeoI07

Member since: 06/10/2021

1,573 Reputation

                                      18 Guides authored                  



                       Badges:
                       4







                                                        +1 more badge