Power Removal Repair Guide

Difficulty

Easy

Steps

4

Time Required

                          5 - 10 minutes            

Sections

1

• Power Removal
• 4 steps

Flags

0

• BackInsignia Flex 11.6

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Power Removal               

• Before working on the device, make sure the device is off and not plugged into any power source for safety reasons. Failure to comply could result in injury.
• Place the device on a firm surface with the device screen facing down.

Before working on the device, make sure the device is off and not plugged into any power source for safety reasons. Failure to comply could result in injury.

Place the device on a firm surface with the device screen facing down.

1024

Step 2

• Remove 2, 6.1 mm Phillips J000 screws from the back of the device.
• If any screws are stripped, refer to the ifixit guide for how to remove a stripped screw. How to Remove a Stripped Screw

Remove 2, 6.1 mm Phillips J000 screws from the back of the device.

If any screws are stripped, refer to the ifixit guide for how to remove a stripped screw. How to Remove a Stripped Screw

Step 3

• Using a plastic tool and the plastic card, gently pry off the back cover.

Using a plastic tool and the plastic card, gently pry off the back cover.

Step 4

• Using tweezers, remove the electrical connector that connects to the battery to remove the power to the battery.

Using tweezers, remove the electrical connector that connects to the battery to remove the power to the battery.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.                                             

Author

                                      with 4 other contributors 

                    Connor Sweeney                     

Member since: 09/28/2016

422 Reputation

                                      5 Guides authored                  



                       Badges:
                       16







                                                        +13 more badges                           

Team

                       Eastern Washington University, Team 2-4, Mathisen Fall 2016                        

                                                  Member of Eastern Washington University, Team 2-4, Mathisen Fall 2016 



                    EWU-MATHISEN-F16S2G4                     


                                            4 Members                     


                                            10 Guides authored                     

Tl Sn - Nov 10, 2022

Reply

Thank you. It got me along to open my Venturer. Wish I could send a picture of the failure.