Difficulty

Difficult

Steps

5

Time Required

                          30 - 50 minutes

Sections

2

  • Vibration Motors
  • 3 steps
  • Motherboard
  • 2 steps

Flags

0

  • BackPowerA Fusion Controller

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

The motherboard is often used as the foundation for many electrical devices and is responsible for both power allocation and communication between various electrical components. When the motherboard is damaged, some electrical components may not operate correctly due to a lack of power or communication.

Before using this guide, be sure to check PowerA Fusion Controller for Xbox One Troubleshooting to ensure that the problem isn’t coming from a different component.

Before beginning, make sure that the controller is not plugged into the console.

In step 3, it is necessary to solder the motherboard into place. Follow the instructions on how to solder and desolder here.

What you need

Step 1

              Vibration Motors
  • Remove the nine 9.2mm screws with a JIS #1 screwdriver.
  • Remove the two bottom plastic grip covers.

Remove the nine 9.2mm screws with a JIS #1 screwdriver.

Remove the two bottom plastic grip covers.

1024

Step 2

  • Remove the two 9.2mm screws with a JIS #1 screwdriver.
  • Remove the back cover of the controller.

Remove the two 9.2mm screws with a JIS #1 screwdriver.

Remove the back cover of the controller.

Step 3

  • Take off the glue that is on top of the soldered joints with a sprudger.
  • Desolder the soldered joints of the red and black wires that are connecting the vibration motors to the motherboard.
  • Remove the vibration motors and put them aside.
  • This guide will show how to solder and desolder connections.

Take off the glue that is on top of the soldered joints with a sprudger.

Desolder the soldered joints of the red and black wires that are connecting the vibration motors to the motherboard.

Remove the vibration motors and put them aside.

This guide will show how to solder and desolder connections.

Step 4

              Motherboard
  • Remove the five 9.2mm screws with a JIS #1 screwdriver. Indicated by the red circles.
  • Lift the motherboard and let it hang.

Remove the five 9.2mm screws with a JIS #1 screwdriver. Indicated by the red circles.

Lift the motherboard and let it hang.

Step 5

  • Remove the four 9.2mm screws that are holding the D-Pad to the controller housing. Indicated by the red circles.
  • Remove the motherboard.

Remove the four 9.2mm screws that are holding the D-Pad to the controller housing. Indicated by the red circles.

Remove the motherboard.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 5 other contributors 


                    Andrea

Member since: 09/26/2017

566 Reputation

                                      4 Guides authored                  



                       Badges:
                       11







                                                        +8 more badges

Team

                       USF Tampa, Team S14-G4, Boczar Fall 2017                        

                                                  Member of USF Tampa, Team S14-G4, Boczar Fall 2017 



                    USFT-BOCZAR-F17S14G4                     


                                            4 Members                     


                                            5 Guides authored

Nhgamer - Jul 15, 2022

Reply

Hi I have a powera fusion controler model CPFA115315-02 and I took the controller apart to clean and I forgot how the lb rb button springs go, I look on the internet and couldn’t find anything. Any help would be great

Thanks