Difficulty
Easy
Steps
3
Time Required
10 minutes
Sections
1
- Buttons
- 3 steps
Flags
0
BackPowerA ProEX Xbox 360 Wired Controller
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Buttons
- Disassemble the case by removing the 8 screws, indicated in red on the picture, that hold the back of the case to the front of the case using a J0 screwdriver.
Disassemble the case by removing the 8 screws, indicated in red on the picture, that hold the back of the case to the front of the case using a J0 screwdriver.
1024
Step 2
- The case should come apart easily. If not, use a spudger to pry the back from the front of the case.
The case should come apart easily. If not, use a spudger to pry the back from the front of the case.
Step 3
- Using a pair of tweezers, remove each button and replace it with a new one.
- A Button
- B Button
- X Button
- Y Button
Using a pair of tweezers, remove each button and replace it with a new one.
A Button
B Button
X Button
Y Button
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
5 other people completed this guide.
Author
with 1 other contributor
Rachel Ferreira
Member since: 10/20/2016
269 Reputation
1 Guide authored
Badges:
6
+3 more badges
Team
UMass Dartmouth, Team 3-1, Isaacson Fall 2016
Member of UMass Dartmouth, Team 3-1, Isaacson Fall 2016
UMASSD-ISAACSON-F16S3G1
3 Members
1 Guide authored
