Difficulty
Easy
Steps
3
Time Required
Suggest a time??
Sections
1
- Keyboard
- 3 steps
Flags
0
BackPowerBook G3 Lombard
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Keyboard
- Turn the computer so that the ports are facing you.
- If the keyboard is locked, open the port cover and turn the keyboard locking screw until the keyboard is unlocked.
Turn the computer so that the ports are facing you.
If the keyboard is locked, open the port cover and turn the keyboard locking screw until the keyboard is unlocked.
1024
Step 2
- Pull the keyboard release tabs toward you and lift up on the keyboard until it pops free.
- Make sure you have removed the laptop battery and CD/DVD module from the expansion bays before proceeding.
Pull the keyboard release tabs toward you and lift up on the keyboard until it pops free.
Make sure you have removed the laptop battery and CD/DVD module from the expansion bays before proceeding.
Step 3
- Lift the keyboard out by pulling it up and away from you. Rest the keyboard, face down, on top of the trackpad.
- In order to replace the keyboard, you must first remove the modem.
Lift the keyboard out by pulling it up and away from you. Rest the keyboard, face down, on top of the trackpad.
In order to replace the keyboard, you must first remove the modem.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
4 other people completed this guide.
Attached Documents
- G3-Lombard-Screw-Guide.pdf
- PDF - 354.56 kb
- View
G3-Lombard-Screw-Guide.pdf
PDF - 354.56 kb
Author
with 1 other contributor
iRobot
Member since: 09/24/2009
1 Reputation
646 Guides authored
Badges:
36
+33 more badges