Featured
Featured Guide
Difficulty
Easy
Steps
3
Time Required
Suggest a time??
Sections
2
- Battery
- 1 step
- RAM
- 2 steps
Flags
1
Featured Guide
This guide has been found to be exceptionally cool by the iFixit staff.
BackPowerBook G4 Aluminum 15" 1.67 GHz
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Battery
- Use a coin to turn the battery locking screw 90 degrees clockwise.
- Lift the battery out of the computer.
Use a coin to turn the battery locking screw 90 degrees clockwise.
Lift the battery out of the computer.
1024
Step 2
RAM
- Remove the four Phillips screws from the memory door.
- Slide the memory door away from the memory compartment.
Remove the four Phillips screws from the memory door.
Slide the memory door away from the memory compartment.
Step 3
- Release the tabs on each side of the RAM chip at the same time. These tabs lock the chip in place and releasing them will cause the chip to “pop” up.
- Pull the chip directly out from its connectors. If there is a second RAM chip installed, pop it out in the same manner.
Release the tabs on each side of the RAM chip at the same time. These tabs lock the chip in place and releasing them will cause the chip to “pop” up.
Pull the chip directly out from its connectors. If there is a second RAM chip installed, pop it out in the same manner.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
28 other people completed this guide.
Attached Documents
- Aluminum-15"-Screw-Guide.pdf
- PDF - 647.44 kb
- View
Aluminum-15"-Screw-Guide.pdf
PDF - 647.44 kb
Author
with 6 other contributors
Andrew Bookholt
575,478 Reputation
618 Guides authored
Badges:
47
+44 more badges
