Difficulty
Easy
Steps
4
Time Required
Suggest a time??
Sections
2
- Lower Case
- 3 steps
- Airport Card
- 1 step
Flags
0
BackPowerBook G4 Titanium Mercury
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Lower Case
- Turn the G4 over.
- Remove the eight Phillips screws from the lower case.
Turn the G4 over.
Remove the eight Phillips screws from the lower case.
1024
Step 2
- Using your thumbs, slide the lower case away from you.
- The lower case may stick in the front on a tab just above the center of the DVD drive. Be careful as you work the case off, or you may break the thin strip of plastic just above the drive.
- Lift the lower case off.
Using your thumbs, slide the lower case away from you.
The lower case may stick in the front on a tab just above the center of the DVD drive. Be careful as you work the case off, or you may break the thin strip of plastic just above the drive.
Lift the lower case off.
Step 3
- Your laptop should look approximately like this.
Your laptop should look approximately like this.
Step 4
Airport Card
- Skip this step if your computer does not have an Airport card.
- Firmly grasp the plastic tab attached to the Airport card and pull up and to the left.
- Disconnect the antenna cable from the left side of the Airport card.
Skip this step if your computer does not have an Airport card.
Firmly grasp the plastic tab attached to the Airport card and pull up and to the left.
Disconnect the antenna cable from the left side of the Airport card.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
2 other people completed this guide.
Attached Documents
- G4-Ti-Mercury-Screw-Guide.pdf
- PDF - 276.55 kb
- View
G4-Ti-Mercury-Screw-Guide.pdf
PDF - 276.55 kb
Author
with 1 other contributor
iRobot
Member since: 09/24/2009
1 Reputation
646 Guides authored
Badges:
36
+33 more badges