Difficulty

Easy

Steps

3

Time Required

Suggest a time??

Sections

1

  • Lower Case
  • 3 steps

Flags

0

  • BackPowerBook G4 Titanium Mercury

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Lower Case
  • Turn the G4 over.
  • Remove the eight Phillips screws from the lower case.

Turn the G4 over.

Remove the eight Phillips screws from the lower case.

1024

Step 2

  • Using your thumbs, slide the lower case away from you.
  • The lower case may stick in the front on a tab just above the center of the DVD drive. Be careful as you work the case off, or you may break the thin strip of plastic just above the drive.
  • Lift the lower case off.

Using your thumbs, slide the lower case away from you.

The lower case may stick in the front on a tab just above the center of the DVD drive. Be careful as you work the case off, or you may break the thin strip of plastic just above the drive.

Lift the lower case off.

Step 3

  • Your laptop should look approximately like this.

Your laptop should look approximately like this.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Attached Documents

  • G4-Ti-Mercury-Screw-Guide.pdf
  • PDF - 276.55 kb
  • View

G4-Ti-Mercury-Screw-Guide.pdf

PDF - 276.55 kb

Author

                                      with 2 other contributors 


                    iRobot

Member since: 09/24/2009

1 Reputation

                                      646 Guides authored                  



                       Badges:
                       36





                                                        +33 more badges