Prerequisite Exterior Housing Disassembly Repair Guide

Difficulty

Easy

Steps

1

Time Required

                          10 minutes            

Sections

• Exterior Housing
• 1 step

Flags

0

• BackiHome iP37

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Exterior Housing               

• Pry the exterior housing off the iHome iP37. You may need extra leverage to do this.
• Note: This step is the most difficult due to the way it is attached. The glue holding the exterior housing to the internals does not break easily. You may want to use iFixit’s iOpener to soften the glue.
• Note: The process is the same for both the upper half and the lower half. To identify the halves, look for these details: the upper half has a metal grid, and the lower half has buttons. If you are replacing any other components, pry off the lower half.

Pry the exterior housing off the iHome iP37. You may need extra leverage to do this.

Note: This step is the most difficult due to the way it is attached. The glue holding the exterior housing to the internals does not break easily. You may want to use iFixit’s iOpener to soften the glue.

Note: The process is the same for both the upper half and the lower half. To identify the halves, look for these details: the upper half has a metal grid, and the lower half has buttons. If you are replacing any other components, pry off the lower half.

1024

To reassemble your device, apply double-sided tape or adhesive on the existing glue and fit the housing back on.

Cancel: I did not complete this guide.

Author

                                      with 4 other contributors 

                    Jerrell                     

Member since: 04/23/2014

730 Reputation

                                      7 Guides authored                  



                       Badges:
                       10







                                                        +7 more badges                           

Team

                       Cal Poly, Team 11-50, Amido Spring 2014                        

                                                  Member of Cal Poly, Team 11-50, Amido Spring 2014 



                    CPSU-AMIDO-S14S11G50                     


                                            4 Members                     


                                            8 Guides authored