Difficulty
Moderate
Steps
3
Time Required
10 minutes
Sections
1
- Presidential 2.0 Power Box Cover Removal
- 3 steps
Flags
2
In Progress
This guide is a work in progress. Reload periodically to see the latest changes!
Member-Contributed Guide
An awesome member of our community made this guide. It is not managed by iFixit staff.
BackPresidential 2.0
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
What you need
Step 1
Removing the Screws
- First remove the 2 Phillips head screws on the front of the power cover.
- BEWARE : this may be more difficult if on carpet and may require another person to push the chair off the floor.
First remove the 2 Phillips head screws on the front of the power cover.
BEWARE : this may be more difficult if on carpet and may require another person to push the chair off the floor.
1024
Step 2
- Using a Philips head screw driver preferable Size 1 , remove the 5 screws.
- Once all screws are removed , Place your hands where the red rectangles are marked, Place your fingers under the lip of that cover and give a slight pull upwards.
- Take Care when removing this cover as there is a wire running across it.
Using a Philips head screw driver preferable Size 1 , remove the 5 screws.
Once all screws are removed , Place your hands where the red rectangles are marked, Place your fingers under the lip of that cover and give a slight pull upwards.
Take Care when removing this cover as there is a wire running across it.
Step 3
- You’re Done !
You’re Done !
To reassemble your device, follow these instructions in reverse order. Be sure you are snapping the ball and joint pieces back together when your are reassembling .
Cancel: I did not complete this guide.
Author
with 1 other contributor
Nick
Member since: 05/30/2017
2,593 Reputation
16 Guides authored
Badges:
2