Difficulty

Moderate

Steps

3

Time Required

                          45 minutes

Sections

1

  • Air valve hose clamp
  • 3 steps

Flags

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

  • BackPresidential

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

What you need

Step 1

              Air valve hose clamp
  • Remove the 2 screws
  • This cover may require some wiggling to remove. DO NOT FORCE it, it has medium sized plastic clips along the edges that lock into metal slots . When forced it will cause these tabs to break.

Remove the 2 screws

This cover may require some wiggling to remove. DO NOT FORCE it, it has medium sized plastic clips along the edges that lock into metal slots . When forced it will cause these tabs to break.

1024

Step 2

  • To Begin we need to put the chair into manual Shiatsu to move the mechanism to the middle of the track
  • Select Manual and then Mode
  • Select Shiatsu by kitting the “ok” button
  • Lastly select Manual , Position and point
  • From here using the UP and DOWN arrows in the middle of the remote HOLD the DOWN arrow and the mechanism should move down until you release the button. Make sure you stop the mechanism in area on the track where you can access the top of the mechanism .

To Begin we need to put the chair into manual Shiatsu to move the mechanism to the middle of the track

Select Manual and then Mode

Select Shiatsu by kitting the “ok” button

Lastly select Manual , Position and point

From here using the UP and DOWN arrows in the middle of the remote HOLD the DOWN arrow and the mechanism should move down until you release the button. Make sure you stop the mechanism in area on the track where you can access the top of the mechanism .

Step 3

  • air valve is located here
  • one hose should be located to the left of the valve
  • other 2 hoses will be located on the right side
  • DO NOT RE ZIP HOSES USE PROVIDED CLAMPS AS THIS WILL JUST REPEAT ITSELF UNTIL CLAMP IS INSTALLED

air valve is located here

one hose should be located to the left of the valve

other 2 hoses will be located on the right side

DO NOT RE ZIP HOSES USE PROVIDED CLAMPS AS THIS WILL JUST REPEAT ITSELF UNTIL CLAMP IS INSTALLED

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 1 other contributor 


                    Nick

Member since: 05/30/2017

2,593 Reputation

                                      16 Guides authored                  



                       Badges:
                       2