Presto Poplite 04820 Popping Chamber Base Replacement Repair Guide

Difficulty

Moderate

Steps

5

Time Required

                          7 - 10 minutes            

Sections

2

• Baseplate
• 2 steps
• Popping Chamber Base
• 3 steps

Flags

0

• BackPresto PopLite 04820

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Baseplate               

• Be sure that the popper is unplugged before disassembly.
• Turn Presto Popper upside down.

Be sure that the popper is unplugged before disassembly.

Turn Presto Popper upside down.

1024

Step 2

• Remove the four 9 mm Phillips #2 screws from the base.
• Once all four screws are removed, take the base off.

Remove the four 9 mm Phillips #2 screws from the base.

Once all four screws are removed, take the base off.

Step 3

              Popping Chamber Base               

• Remove the four 13 mm Phillips #2 screws.

Remove the four 13 mm Phillips #2 screws.

Step 4

• Remove the entire cavity that holds the motor from the base of the PopLite.
• Be gentle while taking the motor out of the base to avoid wire damage.

Remove the entire cavity that holds the motor from the base of the PopLite.

Be gentle while taking the motor out of the base to avoid wire damage.

Step 5

• Turn the popping chamber base sideways.
• Now remove popping chamber base.

Turn the popping chamber base sideways.

Now remove popping chamber base.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 3 other contributors 

                    Emanuele Rocco                     

Member since: 08/27/2015

694 Reputation

                                      6 Guides authored                  



                       Badges:
                       12







                                                        +9 more badges                           

Team

                       USF Tampa, Team 2-5, Blackwell Fall 2015                        

                                                  Member of USF Tampa, Team 2-5, Blackwell Fall 2015 



                    USFT-BLACKWELL-F15S2G5                     


                                            2 Members                     


                                            6 Guides authored                     

Barry - Apr 24, 2017

Reply

Where can I get the new base from?