Difficulty
Difficult
Steps
4
Time Required
10 - 20 minutes
Sections
2
- Baseplate
- 2 steps
- Power Cord
- 2 steps
Flags
0
BackPresto PopLite 04820
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Baseplate
- Be sure that the popper is unplugged before disassembly.
- Turn Presto Popper upside down.
Be sure that the popper is unplugged before disassembly.
Turn Presto Popper upside down.
1024
Step 2
- Remove the four 9 mm Phillips #2 screws from the base.
- Once all four screws are removed, take the base off.
Remove the four 9 mm Phillips #2 screws from the base.
Once all four screws are removed, take the base off.
Step 3
Power Cord
- Untwist the two orange twist-on wire connectors.
- Make a note of which wires are in each of the orange caps.
Untwist the two orange twist-on wire connectors.
Make a note of which wires are in each of the orange caps.
Step 4
- Locate the plastic piece holding the power cord in place.
- Take the metal spudger from the tool kit and pry this piece loose.
- This plastic piece may take excessive force to pry out, just keep trying until it pops out.
- Remove the power cord.
Locate the plastic piece holding the power cord in place.
Take the metal spudger from the tool kit and pry this piece loose.
This plastic piece may take excessive force to pry out, just keep trying until it pops out.
Remove the power cord.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 4 other contributors
Emanuele Rocco
Member since: 08/27/2015
694 Reputation
6 Guides authored
Badges:
12
+9 more badges
Team
USF Tampa, Team 2-5, Blackwell Fall 2015
Member of USF Tampa, Team 2-5, Blackwell Fall 2015
USFT-BLACKWELL-F15S2G5
2 Members
6 Guides authored