Difficulty

Moderate

Steps

7

Time Required

Suggest a time??

Sections

1

  • Program Selector 1320671207
  • 7 steps

Flags

2

Needs More Images

A few more images would make this guide’s procedures crystal clear.

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

  • BackPrivileg 3220 PNC914780592 Modell P6297353 Priv.Nr. 8399 Prod.Nr. 932.169-6

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Program Selector 1320671207
  • First, unscrew the screws at the back of the housing cover with an 8 mm socket wrench.

First, unscrew the screws at the back of the housing cover with an 8 mm socket wrench.

1024

Step 2

  • Secondly, use a small slotted flat-head screwdriver to pry out the two noses from the handle with the bridge (which you touch during operation) at the top and bottom and carefully pull out the part (which you touch during operation).

Secondly, use a small slotted flat-head screwdriver to pry out the two noses from the handle with the bridge (which you touch during operation) at the top and bottom and carefully pull out the part (which you touch during operation).

Step 3

  • Now we come to the actual part, the outer labeled part / ring of the program selector switch (labeled from A to N) - this is fastened with a 7 mm nut. Loosen this nut with a 7 mm socket wrench.

Now we come to the actual part, the outer labeled part / ring of the program selector switch (labeled from A to N) - this is fastened with a 7 mm nut. Loosen this nut with a 7 mm socket wrench.

Step 4

  • Furthermore, the outer part / ring of the program selector switch with 3 lugs (clipped) attached. Also carefully pry these tabs out with a flat-head screwdriver and pull off the labeled (outer part / ring) of the program selector switch (labeled from A to N) to the front.

Furthermore, the outer part / ring of the program selector switch with 3 lugs (clipped) attached. Also carefully pry these tabs out with a flat-head screwdriver and pull off the labeled (outer part / ring) of the program selector switch (labeled from A to N) to the front.

Step 5

  • Now take the new (outer part / ring) of the program selector switch with the Alternative Part No .: 1243085402 and transfer the inscription from the old original (from the removed part) with a thin Fineliner (Edding) and install the whole backwards again. (A is at the top.) 1. clockwise detent! = B; 2. clockwise detent = C, etc.

Now take the new (outer part / ring) of the program selector switch with the Alternative Part No .: 1243085402 and transfer the inscription from the old original (from the removed part) with a thin Fineliner (Edding) and install the whole backwards again. (A is at the top.) 1. clockwise detent! = B; 2. clockwise detent = C, etc.

Step 6

  • Should it be necessary to remove the front panel. 1. Disconnect the temperature controller 2. The wash powder drawer kpl. remove (press nose down) 3. unscrew the screws that hide behind the Waschpulverlublade, with a Phillips screwdriver 4. Lever out the lugs left, right and up: remove the panel

Should it be necessary to remove the front panel. 1. Disconnect the temperature controller 2. The wash powder drawer kpl. remove (press nose down) 3. unscrew the screws that hide behind the Waschpulverlublade, with a Phillips screwdriver 4. Lever out the lugs left, right and up: remove the panel

Step 7

  • Assembly in reverse order

Assembly in reverse order

Repeat the steps in order to reassemble your device.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.                                             


        These translators are helping us fix the world!      Want to contribute?      Start translating ›

Special thanks to these translators:

100%

irlanda

oldturkey03

Author

                                      with 1 other contributor 


                    dieter

Member since: 11/19/2011

307 Reputation

                                      2 Guides authored                  



                       Badges:
                       4







                                                        +1 more badge