Difficulty

Easy

Steps

6

Time Required

                          5 - 10 minutes

Sections

1

  • Screen
  • 6 steps

Flags

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

  • BackHP ProBook 650 G5

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

What you need

Step 1

              Turn of Laptop
  • Turn off your Laptop and open the Lid so that you can access all sides of the Monitor

Turn off your Laptop and open the Lid so that you can access all sides of the Monitor

1024

Step 2

              Remove Plastic Cover
  • Gently lift the Plastic Cover and move around the Screen doing this

Gently lift the Plastic Cover and move around the Screen doing this

Step 3

              Remove Screen
  • Remove the 4 Screws and gently Pull the Screen towards you

Remove the 4 Screws and gently Pull the Screen towards you

Step 4

              Unplug Screen
  • Lay the Screen gently on the Keyboard of the Laptop and unplug the Display Cable
  • To unplug the cable you need to pull up the adhesive Foil and lift the little Lever which secures the Display Cable
  • Remove the old screen

Lay the Screen gently on the Keyboard of the Laptop and unplug the Display Cable

To unplug the cable you need to pull up the adhesive Foil and lift the little Lever which secures the Display Cable

Remove the old screen

Step 5

              Connect new Screen
  • Place the new Screen on the keyboard and align it with the Display Cable
  • Slide the Cable in the Connector and secure it with the Lever and the adhesive foil

Place the new Screen on the keyboard and align it with the Display Cable

Slide the Cable in the Connector and secure it with the Lever and the adhesive foil

Step 6

              Place in the new Screen
  • Place the new Screen on the Little Plastic nobs and Screw it in using the old srews
  • After that place the Plastic cover on Top and gently Press in around the side

Place the new Screen on the Little Plastic nobs and Screw it in using the old srews

After that place the Plastic cover on Top and gently Press in around the side

Turn on the Laptop and check if the Screen is Working. If not go through the Steps again

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.

Author

                                      with 1 other contributor 


                    Sebbo

Member since: 09/23/2020

160 Reputation

                                      1 Guide authored                  



                       Badges:
                       3