Difficulty

Moderate

Steps

7

Time Required

                          30 minutes

Sections

1

  • ProLine HB25 Disassembly
  • 7 steps

Flags

0

  • BackBlender

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              ProLine HB25 Disassembly
  • Unscrew the screw on the back of the product.

Unscrew the screw on the back of the product.

1024

Step 2

  • Pull out the backtab of the housing.
  • Push in the snapfits with, for instance, a screwdriver.

Pull out the backtab of the housing.

Push in the snapfits with, for instance, a screwdriver.

Step 3

  • Separate the housing with calibrated force.
  • Keep your fingers away from the housing and do not bend or break the housing.
  • Use a flathead screwdriver to push out the lower function button.
  • Remove the separating device.

Separate the housing with calibrated force.

Keep your fingers away from the housing and do not bend or break the housing.

Use a flathead screwdriver to push out the lower function button.

Remove the separating device.

Step 4

  • Unscrew the hidden screw under the button.

Unscrew the hidden screw under the button.

Step 5

  • Open the housing.
  • Unscrew the circuit board.
  • Unscrew the wire lock.

Open the housing.

Unscrew the circuit board.

Unscrew the wire lock.

Step 6

  • Push the housing of the button out of the housing.

Push the housing of the button out of the housing.

Step 7

  • Push on the side of the housing of the button to push the button out of the housing.
  • The spring can jump away when you push out the button.

Push on the side of the housing of the button to push the button out of the housing.

The spring can jump away when you push out the button.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 5 other contributors 


                    Jorma van Dalen

Member since: 03/07/2018

175 Reputation

                                      1 Guide authored                  



                       Badges:
                       3

Team

                       Delft University of Technology, Team S1-G2, Flipsen Winter 2018                        

                                                  Member of Delft University of Technology, Team S1-G2, Flipsen Winter 2018 



                    TUD-FLIPSEN-W18S1G2                     


                                            5 Members                     


                                            1 Guide authored