Proscan Plt7223G Battery Replacement Repair Guide

Difficulty

Moderate

Steps

Time Required

                          15 minutes

Sections

Battery
5 steps

Flags

BackProScan PLT7223G
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Battery

Remove both 4 mm screws on the top of the tablet with a PH00 screw driver.

Remove both 4 mm screws on the top of the tablet with a PH00 screw driver.

1024

Step 2

Use the blue plastic opening tool to pry open the tablet.
You will hear popping sounds. That’s okay.
Be careful when using the blue plastic opening tool on the side of the device near the speakers, as there is a wire here that connects the speakers to the motherboard.

Use the blue plastic opening tool to pry open the tablet.

You will hear popping sounds. That’s okay.

Be careful when using the blue plastic opening tool on the side of the device near the speakers, as there is a wire here that connects the speakers to the motherboard.

Step 3

Use a soldering tool and tweezers to remove the black and red wire from the motherboard.
Be sure to pay attention to where each wire goes so that you attach them in the correct order when reassembling the device.
Soldering tool will get hot, handle with care.

Use a soldering tool and tweezers to remove the black and red wire from the motherboard.

Be sure to pay attention to where each wire goes so that you attach them in the correct order when reassembling the device.

Soldering tool will get hot, handle with care.

Step 4

Use a spudger to remove the black tape from the battery.

Use a spudger to remove the black tape from the battery.

Step 5

Using the flat end of a spudger, carefully separate the battery from the base of the device.
There is an adhesive holding the charger in place.

Using the flat end of a spudger, carefully separate the battery from the base of the device.

There is an adhesive holding the charger in place.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      3 other people completed this guide.

Author

                                      with 4 other contributors

                    Nathaniel Girard

Member since: 01/12/2016

287 Reputation

                                      2 Guides authored                  



                       Badges:
                       7







                                                        +4 more badges

Team

                       Eastern Washington University, Team 1-4, Rowley Winter 2016                        

                                                  Member of Eastern Washington University, Team 1-4, Rowley Winter 2016 



                    EWU-ROWLEY-W16S1G4                     


                                            4 Members                     


                                            10 Guides authored

florcomm - Nov 16, 2016

what is the number of the replacement battery??

Genica Harmon - Aug 29, 2017

How will I know if my proscan tablet battery is no good once I remove it

Introduction#

What you need#

Team#

Introduction

What you need

Team