Difficulty
Easy
Steps
5
Time Required
3 minutes
Sections
1
- Front Facing Camera
- 5 steps
Flags
0
BackProScan PLT7223G
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Front Facing Camera
- Remove both 4 mm screws on the top of the tablet with a PH00 screw driver.
Remove both 4 mm screws on the top of the tablet with a PH00 screw driver.
1024
Step 2
- Use the blue plastic opening tool to pry open the tablet.
- You will hear popping sounds. That’s okay.
- Be careful when using the blue plastic opening tool on the side of the device near the speakers, as there is a wire here that connects the speakers to the motherboard.
Use the blue plastic opening tool to pry open the tablet.
You will hear popping sounds. That’s okay.
Be careful when using the blue plastic opening tool on the side of the device near the speakers, as there is a wire here that connects the speakers to the motherboard.
Step 3
- With a spudger, flip up the ZIF connector that connects the camera’s ribbon cable to the motherboard. This will release the ribbon cable.
With a spudger, flip up the ZIF connector that connects the camera’s ribbon cable to the motherboard. This will release the ribbon cable.
Step 4
- Remove the black tape holding down the ribbon cable.
Remove the black tape holding down the ribbon cable.
Step 5
- Remove camera.
Remove camera.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 3 other contributors
Laura Kneeshaw
Member since: 01/12/2016
435 Reputation
2 Guides authored
Badges:
11
+8 more badges
Team
Eastern Washington University, Team 1-4, Rowley Winter 2016
Member of Eastern Washington University, Team 1-4, Rowley Winter 2016
EWU-ROWLEY-W16S1G4
4 Members
10 Guides authored